Cisco SPA8000

The Cisco SPA8000 is an 8-Port FXS gateway. The Cisco SPA8000 is unlocked and can be used with nearly any VoIP platform or service provider.

Cisco SPA8000 Package Contents:

• 1 - Cisco SPA8000 Gateway
• 1 - 12v Power Adapter
• 1 - RJ45 Ethernet Cable
• 1 - Quick Installation Guide

Cisco SPA8000 Overview:

Don't let analog phones come between you and Internet telephony. Part of Cisco Small Business Voice Gateways and ATAs, the Cisco SPA8000 8-Port IP Telephony Gateway allows for connections between eight analog telephones and an IP-based data network, providing small businesses with enhanced communication services through a broadband Internet connection.

Ideal for multi-dwelling environments or business settings such as call centers, the Cisco SPA8000 converts voice traffic and faxes into data packets for IP transmission.

Cisco SPA8000 Specifications:

Note: Many specifications are programmable within a defined range or list of options. Please see the SPA Administration Guide for details. The target configuration profile is uploaded to the Cisco SPA8000 at the time of provisioning.

• MAC Address - (IEEE 802.3)
• IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
• ARP - Address Resolution Protocol
• DNS - A Record (RFC 1706), SRV Record (RFC 2782)
• DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
• DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
• PPoE Client - Point to Point Protocol over Ethernet (RFC 2516)
• ICMP - Internet Control Message Protocol (RFC792)
• TCP - Transmission Control Protocol (RFC793)
• UDP - User Datagram Protocol (RFC768)
• RTP - Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP - Real Time Control Protocol (RFC 1889)
• DiffServ - (RFC 2475), Type of Service - TOS (RFC 791/1349)
• VLAN Tagging - 802.1p
• SNTP - Simple Network Time Protocol (RFC 2030)
• Upload Data Rate Limiting - Static and Automatic
• QoS - Voice Packet Prioritization over Other Packet Type
s
• MAC Address Cloning
• Port Forwarding
• SIP channels support both UDP and TCP transport
• VPN Pass-Through with IPSec ESP, PPTP, and L2TP

• SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
• SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
• Re-registration with Primary SIP Proxy Server
• SIP Support in Network Address Translation Networks - NAT (incl. STUN)
• Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTPM
• Codec Name Assignment
• G.711 (a-law and µ-Law)
• G.726 (16/24/32/40 kbps)
• G.729 A
• G.723.1 (6.3 kbps, 5.3 kbps)
• Dynamic Payload
• Adjustable Audio Frames per Packet
• Fax Tone Detection Pass-Through
• Fax Pass-Though - Using G.711
• DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
• Flexible Dial Plan Support with Interdigit Timers and IP Dialing
• Call Progress Tone Generation
• Jitter Buffer - Adaptive
• Frame Loss Concealment
• Full Duplex Audio
• Echo Cancellation (G.165/G.168)
• VAD - Voice Activity Detection with Silence Suppression
• Comfort Noise Generation (CNG)
• QoS (Ethernet port up-stream bandwidth control, Physical port, MAC address, Application)
• Attenuation / Gain Adjustments
• Flash Hook Timer
• MWI - Message Waiting Indicator Tones
• VMWI - Visual Message Waiting Indicator via FSK
• Polarity Control
• Hook Flash Event Signalling
• Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
• Music on Hold Client
• Streaming Audio Server - up to 10 sessions
• System DDR SDRAM - 16M Bytes
• System Flash ROM - 4M Bytes

• Password Protected System Reset to Factory Default
• Password Protected Admin and User Access Authority
• Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate
• HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
• Authentication: EAP-TLS, EAP-TTLS, and EAP-PEAP
• SIP TLS (Transport Layer Security)
• Up to 256-bit AES Encryption

• Web Browser Administration & Configuration via Integral Web Server
• Telephone Key Pad Configuration with Interactive Voice Prompts
• Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
• Asynchronous Notification of Upgrade Availability via NOTIFY
• Non-intrusive, In-Service Upgrades
• Report Generation & Event Logging
• Stats in BYE Message
• Syslog & Debug Server Records
• Per Line and Purpose Configurable Syslog and Debug Options

• 8 port standard FXS voice ports (RJ-11)
• RJ-21 (50-pin telco connector) multi-port voice connection
• 1 WAN 100baseT RJ-45 Ethernet Port (IEEE 802.3)
• Reset button

• Ring Voltage: 40-90 Vpk Configurable
• Ring Frequency: 20 Hz - 25 Hz
• Ring Waveform: Trapezoidal
• Maximum Ringer Load: 5 REN
• On-hook/off-hook Characteristics:
• On-hook voltage (tip/ring): -46 ~ -56V
• Off-hook current: 18-25 mA
• Terminating Impedance: 600 ohm resistive or 270 ohm + 750ohm//
• 150nF complex impedance
• Frequency Response 300 – 3400Hz
• Return Loss (600 ohm, 300-3400Hz) Up to 20dB
• Insertion Loss (1 Vrms @1 kHz) 3dB – 4dB
• THD (350 mV peak @ 300 Hz) Up to 3%
• Idle Channel Noise -72 dB (typ.)
• Longitudinal Balance 55 dB (typ.)
• Off Hook Threshold (Line Seizure) Rdc < 1000 ohm
• On Hook Threshold (Line Release) Rdc >10000 ohm
• Rdc DC Supervisory Range Rdc > 450 ohm

• FCC (Part 15 Class B), CE, ICES-003, C-Tick Certification, RoHS, UL

• Switching Type (100-240v) Automatic
• DC Input Voltage: 12V DC at 3.0 A Max.
• Power Adapter: 100-240v - 50-60Hz AC Input

• Power, Ethernet, Voice Status, Phone 1,2,3,4,5,6,7,8

• Quick Installation, User, and Configuration Guides are downloaded from www.Linksys.com

• Dimensions - 6.69 x 1.54 x 8.66” (170 x 39 x 220 mm) W x H x D
• Weight - 2.85 lbs (1.30 kg)
• Operating Temp. - 32 to 113°F (0°C to 45°C)
• Storage Temp. - -13 to 185°F (-20°C to 85°C)\
• Operating Humidity - 10% to 90% Non-Condensing, operating and non-operating
• Storage Humidity - 10% to 90% Non-Condensing, operating and non-operating