The CyberData SIP Paging Adapter, part number 011233, is a VoIP endpoint. It will interface analog paging systems with both SIP and Multicast-based audio sources.
The CyberData SPA (SIP Paging Adapter) may be configured to support two separate SIP extensions. SIP extension one can then pass audio to the analog output from a callerís handset, and SIP extension two can play a bell audio, ideal for use as a night ringer when it's configured in a night ring group.
The CyberData SIP Paging Adapter will support up to 9 user-uploadable messages which can be played by a DTMF command. It also supports line-in input which will play music on hold. Then, during a page or night ring, this input will be muted, and output is
restored after the page or night ring has stopped.
CyberData SIP Paging Adapter Features:
- Two SIP extensions
- Voice prompt pass code and page control
- 9 user-uploadable page messages
- HTTP status and command interface
- 10 channel prioritized Multicast ports
- HTTP Web Interface and setup
- Built-in diagnostics
- 10k Ohm input for MOH
- 600 Ohm Balanced audio out
- Unbalanced Line-Out
- Remote amp fault sensor
- STMF and programmatic controlled relay
- Delayed page support
- DTMF pass-through
- Cisco SRST
- 10/100 802.3af PoE