Strobe Lights & Loud Ringers

Viking SL-2-EWP is an LED strobe light with Enhanced Weather Protection (EWP). EWP makes the strobe suitable for outdoor installation in areas with higher levels of precipitation or condensation. SL-2-EWP is a visual notification light with many uses:...

Viking SL-2 is an LED strobe light that acts as a visual indicator. Use SL-2 to improve accessibility, provide a visible signal in loud or quiet environments, warn people of hazards, and more. SL-2 uses an LED bulb for greater efficiency and longer...

Viking LPR-1 is a loud ringer for an analog telephone line to make phone calls more audible in loud environments. This auxiliary electronic ringer is telephone line powered and connects via screw terminals or its modular RJ11 jack. It has an adjustable...

Viking LM-24D displays the line status of up to 24 analog lines or stations to provide a simple, visual indication for when the lines/stations are idle, in-use, or ringing. With an adjustable viewing angle, LM-24D works for desk or wall mounting and...

Viking LM-1A is an LED indicator light to provide a visual notification for when a call is waiting or a phone is ringing. LM-1A is compatible with a standard telephone system with standard DC message waiting voltages from 80V DC to 150V DC. Use LM-1A to...

The Valcom V-9945A is a single tone warble loud horn that has a built in tone generator, speaker, and volume control. Warble tone is available for night ring, single tone for time clock, doorbell, and alarm. Single tone will override warble tone if they...

The Valcom V-9936A is a 6-line audible ringer unit that connects directly to a trunk or station port on a phone system. The Valcom V-9936A provides ringing over paging speakers, contact closure to activate loud bells during ringing, a built-in warble...

The Valcom V-9927A is a multi-tone generator that automatically overrides paging or music with the choice of 15 different tones. The Valcom V-9927 has USA standard immediate evacuation signals, contact closure activation, and allows for choice of 2 sets...

The Valcom V-9925A is a loud warble horn that features 90 Vac ring and 18 Vac buzzer voltage activation. The Valcom V-9925A features a built-in tone generator, 5-watt amplifier, and volume control. Valcom V-9925A Loud Warble Horn Documentation: Valcom...

The Valcom V-9924C is an audible ringer that automatically interups page or music during ringing. The V-9942C connects to a PBX station port and provides ringing over paging speakers and allows for 3 separate zone outputs and volume controls. The Valcom...

The Viking PA-30 paging amp can be used to power speakers, provide loud ringing or for output to other amplifiers. Connect a variety of different paging speakers and horns to this amplifier. Set up the loud ringer with four different tones, including...

Viking PA-2A paging amplifier comes with the 25AE horn to provide loud ringing functionality in analog environments. Provide a reliable loud ringer or paging tones from an unused paging port or trunk port, when using trunk ports background music can be...