Paging Microphones

Valcom V-9939C connects microphones to Valcom one-way amplified speakers. It provides contact closure, working with many microphones with PTT (push-to-talk) switches, and features a built-in mic preamp. Intended for mounting at the mic's location,...

The Valcom V-9934 is a remote microphone for use with the V-9933A. The 9934 features a self-contained microphone and preamp design which is phantom powered meaning no power supply is required. Up to for units may be paralleled on one V-9933A.

The Valcom V-450 is a flexible gooseneck microphone that is 19 inches in length that includes a mounting flange. The Valcom V-450 is omni-directional, low impedance, and features a push to talk switch. Use of the V-450 requires the V-9939B microphone...

The Valcom V-420 is a CB style paging microphone with dynamic noise cancelling technology. The Valcom V-420 features a handheld design with a press-to-talk lever, the cord extends to 6 feet.

The Valcom V-400 is a omni-directional desktop microphone with low impedance that includes a push-to-talk switch and a locking bar. The Valcom V-400 requires that Valcom V-9939C microphone adapter for use.

Get a bundle with microphone and speaker for the 2N IP Audio Kit. The electret microphone has a self-adhesive layer. The microphone is very sensitive, clocking in at 42 dB. It comes with a 2.9m cable. The 45mm speaker also has a self-adhesive layer. It...

2N SIP Mic is a network-connected microphone for use with the 2N IP Audio paging system. SIP Mic has a gooseneck microphone and classic wooden designer case and 12 familiar buttons with labels. The integrated stereo speakers enable two-way communications...

CyberData 011446 is a desktop VoIP microphone that's network-enabled for easy broadcasting using Multicast. Simple to operate, CyberData 011446 has a single Page button that you press to start broadcasting. The microphone has a 12" flexible shaft, solid...