Paging Amplifiers

Valcom SM-VC enables remote adjusting of volume when used with a Valcom SM120 Amplifier. By using this volume control knob, you can adjust the volume of the paging system from up to 1000 feet away. Mount SM-VC in a standard single-gang box (not...

Viking PP-250 is a power amplifier for use in an analog 70V paging system. The amp drives a 250 Watt load — for up to 250 speakers. Set it up to broadcast messages and music from any analog line level paging source. Control volume, input,...

Viking PA-250-IP brings 250 Watts of power for an IP paging system — including SIP and Multicast systems. The amplifier can drive up to 250 speakers in a single system using an improved design — 3x better efficiency for more power in...

Viking PA-250 is a powerful paging amplifier that can drive up to 250 speakers or paging horns — incredible for 70V paging systems. Designed for large deployments of 8 to 250 paging speakers, the 250W amp broadcasts messages or music from any...

The Valcom V-2994-W is a paging port preamp and expander that allows for up to 150 one-way speakers per unit. The Valcom V-2994-W features a master volume control that can be used for entire paging systems or groups of remote speakers. Valcom V-2994-W...

The Valcom V-1095 is a 70-volt expander that expands a 25/70/100 volt system without straining the existing amplifier. The Valcom V-1095 connects to the amplifier output or anywhere in the volt line without any additional amplifiers or heavy gauge cable...

The Valcom V-1094A is a paging port preamp expander that provides virtually unlimted expansion for Valcom one-way speakers. Valcom V-1094A Documentation: Valcom V-1094A Installation Manual Valcom V-1094A Technical Specifications

Set up the Bogen TPU35B amplifier for a variety of uses. Play background music, page employees and customers, or enable a night ringer. Page from a microphone or phone, and when background music is interrupted it will gradually resume to normal level...

Wall mount or rack mount the Bogen TPU250 amplifier. Connect a media player to the amplifier's RCA jack or screw terminal, and play background music or other media. Paging can be accomplished through a connected telephone handset or microphone. When the...

The Bogen TPU15A paging amplifier is built to support various input types and paging applications. Automatic output leveling and volume controls ensure that audio quality is steady and consistent. Operate this amplifier on a 25V or 70V paging system...

Paging can be accomplished through the Bogen TPU100B amplifier with either a telephone handset or a microphone. An RCA jack and other inputs let you play background music through the amplifier while the page isn't going through. Background music can...

Viking PA-IP is a paging adapter for integrating analog paging endpoints like speakers or zone controllers with your computer network using SIP. The PA-IP also features a high-efficiency 6W amplifier for driving up to 4 connected loudspeakers. Compact...