Cisco Video Conferencing

Mount the 55" Cisco Spark Board using this OEM wall stand kit. Comes with all the hardware you need to set it up and mount the Spark Board.

Mount the 55" Cisco Spark Board using this OEM wall mount kit. Comes with all the hardware you need to set it up and mount the Spark Board.

Mount the 55" Cisco Spark Board using this OEM floor stand kit. Comes with all the hardware you need to set it up and mount the Spark Board.

Cisco PWR-SX10-AC is an AC power adapter for the Cisco SX10 Quick Set.

Cisco US Power Cord - PWR-CORD-US-A

Cisco PWR-60W-SX-AC is a 60W power adapter for the Cisco SX20 Quick Set video conferencing system.

Cisco E20 Power Supply - PSU-12VDC-40W2

MultiSite license for the Cisco TelePresence SX80 codec. The license enables 5-way 720p30 multipoint and 4-way 1080p30 multipoint.

Cisco LIC-SX20-MS is the MultiSite option for the SX20. SX20 MultiSite uses an embedded MCU to enable you to setup multipoint calls with three or more participants by video and/or telephone.

The Cisco TelePresence SpeakerTrack 60 is a dual-camera system. Each camera can be managed and operated individually for dynamic interactions with your meeting room. For example, use one camera to offer a wide shot of your room, while the other camera...

Cisco TelePresence Table Microphone 60 for the Cisco MX700 and MX800 video conferencing systems. Each system can support a total of six microphones to fully scale your video conferencing solution to match your participantsâ audio requirements.

The Cisco TelePresence Ceiling Microphone, PN: CTS-MIC-CLNG-G2, is a networked microphone that gives 180° coverage with a wideband 80 Hz to 20 kHz frequency range. The microphone connects to the network via the included Ethernet cable. A vertical plate...