Axis TP3604-E Cellular Back Box - 03088-004

Axis TP3604-E is a purpose-built solution for connecting compatible Axis cameras to an existing 4G or 5G Private Cellular Network (PCN). As of Sept 2026, TP3604-E is compatible with Axis P32 and P14 cameras. Use it to enable wireless transmission of the camera feed with reliable uplink performance, high bandwidth, low latency, and robust cybersecurity — all while reducing cabling infrastructure and the need for trenching. TP3604-E is made for use with existing private cellular networks (PCNs). It supports bandwidth sufficient for HD audio and image quality, and with Axis's progressive edge-based technologies including intelligent AI analytics run on device, you can build a first-class IP surveillance camera system while gaining the advantages of wireless private cell network connectivity.

TP3604-E is also a secure, outdoor-ready back box designed for ease of installation; it works with one camera. To connect the camera to the PCN, insert a SIM card into the back box, then attach the camera on top of the back box — the form-factors are made to match. You then install the camera and back box together wherever the PCN signal is strong and power is available; TP3604-E can be powered via PoE or AC power supply, including mains power.

© 2026 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.

Axis TP3604-E Quick Specs:

• System On Chip (SoC): NXP i.MX 8M Nano
• Wireless Interface: 4G Standalone, 5G Standalone
• Durability Ratings: IP66, IK10
• SIM Card: Nano-SIM (4FF)
• Hardware Interfaces:
• Ethernet: Gigabit RJ45 PoE
• Power: AC input, terminal block, RJ45 PoE
• Operating Temperature Range: -40°F to 122°F

Axis TP3604-E Cellular Back Box Package Contents:

• Back Box
• Installation Guide
• Torx T20 Screwdriver
• Resistorx L-Key
• Terminal Block Connector
• Connector Guard
• Cable Gaskets
• Owner Authentication Key

Axis TP3604-E Documentation:

• Axis TP3604-E Datasheet
• Axis TP3604-E Installation Guide
• Axis TP3604-E Dimension Drawing