More

The Epygi QXFXS24 is designed to join up to 24 analog devices to a VoIP network or IP PBX. Let your existing analog phones, fax machines and legacy equipment receive the benefits of VoIP without having to pay for costly replacement devices. Plug and play...

Add up to four PSTN lines to your IP PBX with the Epygi QXFXO4 gateway. The gateway supports four simultaneous IP to PSTN calls. A total of four FXO ports and two network ports enable connectivity with the PSTN and your VoIP phone system. This gateway is...

Bridge telephony between T1 and VoIP with the Epygi QXE1T1 gateway. The gateway supports 24 simultaneous calls through T1 or 30 simultaneous calls through E1. Features onboard the gateway include call routing, multi-level auto attendant capabilities and...

The Epygi QuadroM gateway features a single T1 port to support up to 24 concurrent calls. Bridge telephony between your PBX or PSTN and a VoIP network. The gateway offers call statistics, call routing, an auto attendant and T.38 fax relay. LEDs on the...

Get an official Ubiquiti Power over Ethernet injector to provide reliable power to your Ubiquiti access points through an Ethernet cable. Choosing authentic Ubiquiti PoE devices protects your WiFi network investment.Ubiquiti POE-48-24W-G is a 48V 24W...

Ubiquiti PoE injector with 48V output voltage, plus surge protection and earth grounding. Couple the PoE adapter to the Ethernet run between a non-PoE network switch and a PoE-enabled device. The adapter injects power into the run, supplying the...

PoE injector for the Ubiquiti airFiber AF-5X carrier backhaul radio. The adapter is specifically designed to supply PoE to this device. Combine the adapter to the cable run between the network switch and the radio. Ubiquiti PoE Injector Quick Specs: ...

Ubiquiti PoE injector for supplying power to a PoE-enabled IP or VoIP device. Combine the adapter with the cable run between a network switch and the device. Supplies 24V output voltage, with surge protection and earth grounding built in. Ubiquiti PoE...

Deploy this Ubiquiti accessory to supply power to a PoE-enabled device. The PoE injector has a 24V output voltage and supports gigabit Ethernet environments. Couple an Ethernet run between a network switch and a PoE-enabled device with this adapter,...

Ubiquiti PoE injector with 24V output voltage. Use this adapter to supply power to a PoE-enabled endpoint, when the network switch or other appliance does not provide it. Plug in an Ethernet cable coming from the switch, for example, and then plug in a...

Ubiquiti PoE injector with 24V output and gigabit Ethernet connectivity. Connect this PoE adapter between your network switch and the PoE-enabled device. The adapter can injects power into the Ethernet cable, feeding power to the PoE-enabled endpoint...

The Ubiquiti POE-15-12W is a PoE injector with 15V at 0.8A output. Use the injector to supply power to a PoE-enabled device from a non-PoE network switch. The device injects power to the Ethernet cable running to the device. Earth grounding and surge...