Industry Best Pricing
Quantity discounts available
Have a question?
Quantity discounts available
Pre-sales product and solution advice
Add-on tech support plans available
Same day shipping on most orders
Viking E-32TF-IP is a rugged VoIP intercom that uses a built-in motion sensor to enable touch-free use. All you need to do is wave your hand in front of the sensor to start the call. By using a motion sensor rather than a button, E-32TF-IP improves sanitation — reduce the touching of surfaces. The IP intercom's sensor has a ring LED that shows its status — blue when idle, flashing green when dialing, steady green when connected. Set up to 5 customizable numbers for the intercom to dial when a call is initiated. The sensor's pickup range can be from 1 to 4 inches — customize to your desire.
Viking E-32TF-IP comes with automatic polling and programming software. Manage the VoIP intercom through the network — supports the open SIP protocol. E-32TF-IP has a 14 gauge stainless steel faceplate with laser etched graphics and comes with Torx security screws to reduce physical tampering. Connect peripherals like door strikes or strobes lights using the 2 Amp relay contacts — integrated system. As a VoIP intercom, it connects to your network using a standard Ethernet cable. Power it via PoE.
Viking E-32TF-IP is intended for flush mounting using a standard double gang box (not included).
© 2021 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.