Yealink W80B Large Scale Multi-Cell Wireless IP Base Station

Yealink W80B is an IP base station for use as part of a large, multi-cell wireless IP phone system. The base station communicates with Yealink W53H or W56H Wireless Handsets using DECT, which supports wideband HD audio, encrypts communications, and reduces spectrum density in offices with many Wi-Fi and Bluetooth devices. W80B is a scalable solution for increasing mobility in the office and for improving coverage in larger spaces like warehouses, retail stores, and hangars. When set up as part of a multi-cell system, W80B provides seamless transfer between base stations, which for the user equals more room to roam without worrying about the call dropping.

Yealink recommends for indoor spaces that the base stations be 20 to 50m (66ft to 164ft) apart. Because it is an extended wireless phone system, Yealink W80B also handles many more handsets and calls than the typical system. You can configure up to 30 base stations as part of a single wireless phone system. Each system can support up to 100 handsets with up to 100 concurrent calls as a whole or 8 per base station. W80B connects to your IP network using Ethernet and is powered via PoE. It supports the open SIP protocol and is compatible with 3CX, BroadSoft, and Metaswitch.

Yealink W80B Base Station Quick Specs:

• Communications Protocols: SIP, DECT
• VoIP Accounts: up to 100
• Ethernet Port: 10/100
• PoE: 802.3af Class 1
• Concurrent Calls: up to 100 per system
• Base Stations: up to 30 per system
• Handsets: up to 100 per system
• Active Calls: up to 8 (4 wideband) per base station
• Indoor Range: 20m (66ft) - 50m (164ft)
• Outdoor Range: 300m (984ft)
• Audio Codecs: Opus, AMR-WB, G.722, PCMU, PCMA, G.726, G.729, iLBC

Yealink W80B Multi-Cell Wireless IP Base Station Package Contents:

• Yealink W80B Base Station
• Expansion Screws
• Quick Start Guide