Viking E-70-WH-EWP Card Reader Door Phone in White

The Viking E-70-WH-EWP door phone has a built-in Wiegand card reader and is protected by enhanced weatherproofing. Connect a compatible door controller to the phone and swipe a card in front of the reader to open a locked door. Enhanced weather protection includes a mylar speaker, gaskets, seals and a self-draining microphone mount. Guests and visitors can press the call button on the phone to access two-way voice communications.

Surface mount the Viking E-70-WH-EWP phone to the optional VE-5x5 box, or mount it on the optional VE-GNP gooseneck pedestal. As is, the phone can be flushed mounted to a double gang electrical box. Install the phone outside, rated IP66 to withstand wind, rain, snow and debris, and resist incursion. Additional features include programmable intelligent call progress detection, selectable auto answer and adjustable volume levels.

Viking E-70-WH-EWP Door Phone Quick Specs:

• Connectivity: analog
• Power: via telephone line or DC
• CPC Disconnect: 300ms minimum
• Volume: max. 62db @ 1m
• Card Reader: built-in
• Data Format: 26-bit Wiegand
• Frequency: 125KHz
• Read Range: 1.25 to 2.0
• Operating Conditions: IP66 rated, -30° to 150° F
• Dimensions: 2.84 x 1.8 x 1.65 (phone)
• 4.875 x 4.938 x 0.17 (faceplate)
• Mounting: flush in double gang box

Viking Electronics E-70-WH-EWP Door Intercom Package Contents:

• Viking E-70-WH-EWP door phone
• Faceplate in white
• LED light pipe
• 4x hexdrive flathead screws
• 1/4 foam faceplate gasket
• Circuit board mounting plate
• 2x double gang adapter plates
• Gel-filled butt connectors

Viking E-70 Series Documentation:

• Viking E-70 Series Product Manual