2N Helios IP Safety is a rugged, high-visibility intercom for emergency situations. Designed to be extremely durable and vandal-resistant, IP Safety has a chassis cast out of aluminum and is rated IP69K and IK10. It can withstand high-pressure, high-temperature washing. This emergency intercom is a bright orange (RAL 2004) for high visibility in critical situations. 2N 01355-001 has a single, bright red emergency button. The intercom can control two electric locks and lets you connect an additional switch. 2N 01355-001 is a full-duplex intercom with a 10W loudspeaker and dual built-in microphones, so you get clear, loud sound, even in a subway tunnel, on the factory floor, or wherever else you install it.
2N IP Safety is a network-enabled intercom that runs SIP, which means it can integrate with your IP access control or IP intercom system. Because it runs SIP, the intercom is broadly interoperable with platforms like Cisco and Avaya. Being an IP intercom makes management simpler and gives you features beyond what analog intercoms offer. The emergency phone connects to your network via an Ethernet cable, and can be powered through the same cable using PoE.
2N IP Safety Intercom Quick Specs:
- Integrated Components:
- Communications Protocol: SIP
- Ethernet Ports: 1x 10/100
- PoE: 802.3af Class 0
- Microphone: 2x built-in
- Speaker: 10W
- Audio Codecs: G.711, G.729, G.722, L16/16 kHz
- Temperature: -40°F - 131°F
- Ratings: IP69K, IK10
2N Helios IP Safety Emergency Intercom Package Contents:
- 2N IP Safety intercom
- Torx 10/20 double-ended wrench
- Spare sealing for big bushing for a thick cable, one hole
- Big blank with nut
- Mounting template
- Grounding connector with screw
- 4x screws and "intelligent" dowels
- Installation manual
Note: Mounting frame not included.
2N 01355-001 used to be known as 2N 9152101MW.