Bogen Nyquist NQ-S1810CT-T1 VoIP Ceiling Speaker

Bogen Nyquist NQ-S1810CT-T1 is a IP talk-back paging speaker for indoor installation in ceilings. Designed for high-quality audio, NQ-S1810CT-T1 has a built-in 10 W amplifier, which means it requires no external amp; in fact, it can act as a source for up to four passive 25V/70V speakers, helping you easily extend the paging system. For high-quality two-way audio, the speaker has a separate MEMS digital microphone and uses DSP-based noise rejection and voice bandwidth optimization.

NQ-S1810CT-T1 is a VoIP paging speaker that's configured and managed through the network. It connects to the network via an Ethernet cable and is powered via PoE; if you connect additional passive speakers, it can deliver power to those speakers without requiring a separate power supply — all PoE. In Standalone Mode, it can function as a SIP endpoints in third-party paging systems. NQ-S1810CT-T1 comes preassembled for easier installation.

© 2026 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.

Bogen NQ-S1810CT-T1 Quick Specs:

• Amplifier: integrated 10 W
• Ethernet Port: 10/100 RJ45
• Power: PoE Class 3 (802.3af)
• Relay Output: Form C

Bogen Nyquist NQ-S1810CT-T1 VoIP Ceiling Speaker Package Contents:

• Speaker Assembly
• Safety Cable
• Installation Guide

Bogen NQ-S1810CT-T1 Documentation:

• Bogen NQ-S1810CT-T1 Specification Sheet
• Bogen NQ-S1810CT-T1 Installation and Use Guide
• Bogen NQ-S1810CT-T1 Configuration Guide