Viking E-10-IP Flush-Mount IP Entry Phone, Black

The Viking E-10-IP entry phone can be installed on your IP-based network. Program the device from a touch tone phone or PC. Up to five phone numbers can be programmed into this entry phone. Information including numbers and locations are stored in the phone non-volatile memory. A blue call-connected LED lets you know that the Viking E-10-IP phone has reached an outside number. This entry phone can work with compatible SIP networks and third-party phone systems. Power can provided to the phone through PoE.

Install this phone indoors at a gate or other entry, or in a hallway or other public area. Flush mount the phone with the included rough-in box, or surface mount the phone with the optional VE-5x5 box. From a remote location, the phone can be programmed, including the phone microphone and speaker volume. Deploy this phone in any entry and manage it from any location.

Viking E-10-IP Entry Phone Quick Specs:

• Connectivity Type: IP/VoIP
• Communications Protocol: SIP
• Ethernet Ports: 1x 10/100
• PoE: 802.3af Class 1
• Additional Interfaces: 3x gel-filled butt connectors
• Sound Pressure: up to 90dB SPL @ 1m
• Audio Codecs: G.711¼/a, G.722
• Temperature Range: -40°F - 140°F

Viking Electronics E-10-IP Door Entry Phone Package Contents:

• Viking E-10-IP Entry Phone
• Faceplate Gasket
• Torx T-10 Security Bit
• 6-32 x 0.75" Flat Head Torx Drive Screws, Black
• Gel-Filled Butt Connectors
• Flush Mount Back Box

Viking E-10-IP Documentation:

• Viking E-10-IP Product Manual
• Viking E-10-IP Quick Start Guide
• Viking VoIP Compatibility Guide