Talkaphone ETP-520CP Analog Call Station with Handset Only

Talkaphone ETP-520CP is an analog call station with handset. ETP-520CP is an outdoor-ready call station. It uses a handset with noise-cancelling microphone and 20-inch armored handset cord for more private calls than a standard intercom affords and is also a great option for noisy areas. And it's rugged, too: its faceplate is made from vandal-resistant, marine grade stainless steel and it comes with Torx security screws. For accessibility, the call station has CALL written in both clear raised letters and braille. It has one red call button and LED lights that indicate call status.

ETP-520CP in an analog call station that is phone-line powered. Its auto-dialer will cycle through up to 5 phone numbers that you can set. It can identify its location via a pre-corded voice message, streamlining response. It has I/O connectors for connecting peripherals like a strobe light, access control panel, and more.

© 2026 IP Phone Warehouse. All rights reserved, including the right to reproduce this product description or portions thereof in any form whatsoever.

Talkaphone ETP-520CP Quick Specs:

• Handset Cord: 20 in
• Construction: #4 brushed 316 stainless steel faceplate
• Auxiliary Input: 1x relay input
• Auxiliary Outputs: 2x relay outputs
• Line Level Output: 1x 600 Ohm line level audio output
• Durability Rating: NEMA Type 3R

Talkaphone ETP-520CP Analog Call Station with Handset Only Package Contents:

• Call Station
• 6x #10-24 x 3/4-in T20 Torx Screws

Talkaphone ETP-520CP Documentation:

• Talkaphone ETP-520CP Datasheet
• Talkaphone ETP-520 Series Quick Installation Guide